Pneumatically Actuated freebear unit

AFU-1625

T-groove insertion type freebear unit AFU-1625 Series

You can use it by inserting it in existing T-groove without the need for square groove processing.
It can be inserted only when required or can be freely inserted/extracted, and thus can be conveniently attached onto machines without lifting function.

(Lowered by means of mold weight or forced exhaust)
Sizes other than shown below are also available.Please specify the details in the inquiry sheet.

※If the T-groove is deeper than 30mm, you need to adjust the height by installing a spacer underneath the AFU.
In such case, make sure that the ball extrudes 2mm from the upper surface of the bolster when the AFU rises. We can provide various types of spacers.

Connection dimension diagram

Calculation formula of full length A=14+(Sum of L1)+(2×Number of connections)

(Unit:mm)

ModelBody size(mm)WeightOperating air pressureData
Download
(DXF/PDF)
LL1Pkg0.3MPa0.4MPa0.5MPa0.6MPa
Load capacity
kNkgfkNkgfkNkgfkNkgf
AFU-1625-2002001845×P21.2=1060.80.3636.20.4747.90.5960.20.7172.4DXFPDF
AFU-1625-60060058423×P22=5062.21.24126.01.65170.32.06210.12.47251.9DXFPDF

Download the 3D CAD data from the "PART Community" site

contact

Please feel free to contact us for products, services, catalogs, etc.

Click here for inquiries

'FREEBEAR' is a registered trademark of FREEBEAR CORPORATION.