T-groove insertion type freebear unit AFU-2544-series

You can use it by inserting it in existing T-groove without the need for square groove processing.
It can be inserted only when required or can be freely inserted/extracted, and thus can be conveniently attached onto machines without lifting function.

AFU-2544-series

(Lowered by means of mold weight or forced exhaust)
Sizes other than shown below are also available.
Please specify the details in the inquiry sheet AFU-2544-series

AFU-2544-series

*If the T-groove is deeper than 46mm, you need to adjust the height by installing a spacer underneath the AFU.
 In such case, make sure that the ball extrudes 2mm from the upper surface of the bolster when the AFU rises.
 We can provide various types of spacers.

AFU-2544-series

Model Body size (mm) Weight (kg) Relation of air pressure and load capacity kN (kgf) Data Download
(DXF/PDF)
L L1 P One piece of AFU
Operating air pressure MPa (kgf/㎠)
0.40
(4.1)
0.50
(5.1)
0.60
(6.1)
AFU-2544-300 297.5 272 7×P24=168 2.6 1.47
(149.9)
1.96
(199.9)
2.45
(249.8)
DXFPDF
AFU-2544-540 537.5 512 17×P24=408 4.8 2.94
(299.8)
3.92
(399.8)
4.91
(500.1)
DXFPDF
AFU-2544-680 681.5 656 23×P24=552 6 3.68
(375.3)
4.90
(499.7)
6.13
(625.1)
DXFPDF