Y-type
A synonym for “Ball Transfer”.
High quality products with wide application.
Stainless steel ball seat further improves the performance.
（Unit：mm）
| Model | Allowable load | Max. load | Main ball | Small ball | Body (cover) | Ball seat | Weight | Data Download （DXF/PDF） |
|---|---|---|---|---|---|---|---|---|
| C-8Y | 30kg | 60kg | Steel | Steel | Steel | SUS | 138g | DXFPDF |
| CS-8Y | 30kg | 60kg | SUS | SUS | Steel | SUS | 138g | DXFPDF |
| C-8YH | 80kg | 160kg | Steel | Steel | Steel | Steel ※The cutting-machined ball seat is used | 212g | DXFPDF |
| S-8Y | 30kg | 60kg | SUS | SUS | SUS | SUS | 136g | DXFPDF |
| P-8Y | 5kg | – | Nylon | SUS | Steel | SUS | 79g | DXF PDF |
※The weight of single conveyance object shall not exceed 1000 kg.
※Product specifications are subject to change without prior notice. Please contact us for details.
※For materials not contained herein, please contact us.
※The main ball of the stainless steel products contained herein is made of SUS440C.Please consult us for rust prevention purposes.
with MF seal
U.S.PAT. 11,447,342 B2
Microfiber (MF seal) is used for the seal.
The coefficient of friction is lower than that of conventional rubber-sealed products, and the coefficient of friction during workpiece transfer is the same as that of free bears without a seal.
（Unit：mm）
For materials not contained herein, please contact us.
with scrap removing slits
Scrap removing function is added to 8Y type which has the widest application. Processing scrap removing slit further improves the service life.
（Unit：mm）
Resin
Resin type products do not damage the conveying surface and are suitable for environments apt to rust.
They can also be used in clean room.(Refer to products for clean room for details)
（Unit：mm）